Frutteto CVT 115 S Stage III B_DJI_0674_preview.jpg

GNSS receivers

STEERING SYSTEMS WITH SATELLITE ASSISTANCE. OUR RECEIVERS USE FREE, INTERNATIONALLY AVAILABLE SIGNALS.

You can choose the system that best suits your operation. Our receivers use free, internationally available signals, which offer different accuracy levels depending on the correction service and the receiver model:

  • Submeter for Egnos / WAAS / Autonomous with track-to-track accuracy of about 25 cm,
  • Decimeter for TopNet signals:
    • TopNet Global D (only SRC40) with a track-to-track accuracy of about 8 cm
  • Centimeter for RTK with an absolute and repeatable accuracy of 2-3 cm


SAME offers you all this with products that perfectly match your needs.

    ricevitore-gnss-src-40.png

    SRC40. THE RECEIVER FOR THE AUTOMATIC STEERING SYSTEM.

    The SRC40 is not only a GNSS receiver, but also includes full control technology for the automatic steering system. The modular structure deserves a special mention, i.e. depending on the desired correction service, the components in the receiver can simply be upgraded:

    IMU: 3-axis gyroscope for detecting slopes on hills

    Modem: to receive RTK-NTRIP correction data

    As all components are integrated in the same housing, it is very easy to change the receiver over from one machine to another. This makes it very simple to switch vehicles, as the changeover only takes a few minutes!

    ricevitore-gnss-sc-10 (1).png

    SC10. THE RECEIVER FOR MANUAL GUIDANCE SYSTEMS.

    This receiver is designed for manual guidance systems and is available in two different versions:

    • Visual Guidance 25: this aftermarket kit combines the SC10 GNSS receiver and a 4,3” touchscreen terminal, and can be installed independently on any type of machines.
    • Visual Guidance 50: machines equipped with the integrated iMonitor can easily be upgraded with a SC10 receiver. Besides manual track guidance, Visual Guidance 50 allows to use all standard functions included in the iMonitor. It is a very cost-efficient way to benefit from the wide range of features offered by our iMonitors, such as Automatic Section Control (TC-SC).
      • Easy to install on machines through the iMonitor
      • Access to many functions of the iMonitor, e.g. Automatic Section Control
      • Correction services: Autonom/Glonass

    Note: this receiver cannot be upgraded to self-guidance.